• #N361 - 1-3/4” sq.
  knotted nylon, UV stabilized, black net stops baseballs & softballs


• Pulley system to lower and raise nets *See product specifications manual for details.


• Netting has permanently attached coated galvanized steel cable across top, which reduces “net sag”
• Both horizontal and vertical galvanized and stainless steel tension cable assemblies
• Vinyl-coated galvanized steel hold-back pole collars included


• Standard upright is 20' high - also available in 25', 30', 35' or 40' heights


• Uprights range from 6" to 8" diameter heavy-wall aluminum 6061T6 tensile strength ranging from .188" to .288"wall thickness


• Installation requires ground sleeve (AAE's footings are engineered as 20' on center max spacing)


• Mill finish standard on posts (custom powder-coating also available for an additional cost)


• Optional vinyl-coated steel groundbar with welded bar for net attachment is available if the field does not have a backstop wall or fence (bar needs to fasten to concrete curb)


• See drawings for specifications, installation instructions and plan/layout recommendations
• See Model No. RBW - Removable Backstop Wall, which can be integrated into any AAE Backstop System to create a turnkey backstop solution for your installation


• Proudly Made in the USA & protected by our AAE Warranty

**PLEASE NOTE: This product is sold by the linear foot - typically in 20' sections. Quantity above must be entered as the length required (i.e. Qty: 100 = 100' in length).**